The short answer: This was an act of sabotage.
Saturday, July 6, 2013
Friday, July 5, 2013
Saturday, June 22, 2013
Saturday, April 13, 2013
Get The Most From Your Oil Change
While offering assistance to change the oil in my friend's RX-8, we noticed a simple way to drain the oil out of the oil coolers during an oil change. Instead of lowering each side of the car to help drain additional oil, we used a 7/8 in. wrench and remove each oil cooler thermostat.
![]() |
| Oil Cooler Thermostat |
Wednesday, September 26, 2012
Long overdue update
Its been so long, so lets cut right to the chase. The motor is currently being rebuilt with custom cut side seals by Wankel Works, in addition to the custom street port.
| Rotor with one side seal installed and two corner seals |
| Motor Assembled |
Subscribe to:
Posts (Atom)
